|
Metal Marushin S.A.A. .45 Cavalry 7 1/2in barrel with Real Wood Grips Metal Marushin : COLT S.A.A. .45 (Cavalry) ALL Metal with Real Wood Grips Functions, strips like the real thing! Weight approx: 1.1 Kilogram Barrel Length approx: 7 1/2" Vents from chamber Original gold finish, could be polished to a high silver chrome finish In very good condition!! Appears unfired! Photos above of actual revolver for sale Includes Original box, original instructions, six reusable Marushin Colt .45 firing cartridges (in new / unfired condition) (to make the bang/smoke requires 7mm PFC primer caps/see below) We ship Internationally. Please ask for shipping quote : sales@mg-props.co.uk UK Customer this item is VCRA exempt. PFC Primer caps: £9.50 per box (1 box = 100 PFC caps) These are what makes the bang and smoke Hudson: Colt S.A.A. .45 Dummy Bullets: Six real look dummy bullets £22.95 per box :Great for displaying with your S.A.A. .45 Colt S.A.A. .45 Real Look Dummy bullets Real look Colt .45 bullets with correct marking, great for display with your S.A.A. .45 : Six cartridges : £22.95 Leather S.A.A. .45 Gun Belt Holster: €95.45 / £85.00 Made in Mexico, right side hang, used, in good condition. Fits waits up to 36in. Dummy bullets not included Double Gun Belt Holster....on site soon
Brief info on COLT S.A.A. .45 Revolvers Colt SAA revolvers have been produced as Single Action Army and Buntline models . . . standard models have a round top frame . . . barrel lengths are 4 3/4, 5 1/2, and 7 1/2 inches. The Buntline model came with a 12 inch barrel but was otherwise similar to the regular SAA. The SAA uses a hammer mounted firing pin, and a loading gate in the left side of the frame gives access for loading and unloading. The steel ejector rod housing is located on the lower right side of the barrel, aligned with the loading gate. The fluted cylinder is easily removed for cleaning . . . and can be removed from the right side of the frame. To eject fired cases from a Colt single action revolver, the hammer is put in its half-cock position . . . the cylinder is manually rotated . . . so that a stroke of the spring loaded ejector rod can knock out the case. Loading is likewise accomplished one chamber at a time |