Colt's Classic S.A.A. .45 Cavalry
7 1/2in barrel : Serial No.
Kokusai Colt's Classic (old model) : COLT S.A.A. .45 Cavalry
Serial number is stamped on the body and trigger guard section as seen in photos above
ALL Metal. Includes: 6x real look firing cartridges. No original box.
Functions, strips like the real thing!
Weight approx: 1.1 Kilogram
Barrel Length approx: 7 1/2"
Vents from chamber
Original gold finish, now a shiny chrome silver finish
In very good condition, works great!!
Includes, six firing cartridges (to make the bang/smoke requires PFC primer caps/see below)
We ship Internationally. Please ask for shipping quote : firstname.lastname@example.org
UK Customer this item is VCRA exempt.
PFC Primer caps:
€11.00 / £8.50 per box (1 box = 100 PFC caps) These are what makes the bang and smoke
Hudson: Colt S.A.A. .45 Dummy Bullets:
Colt S.A.A. .45 Real Look Dummy bullets
Real look Colt .45 bullets with correct marking, great for display with your S.A.A. .45 : Six cartridges : €33.25 / £22.95
Real Wood Grips: In very good condition : £29.95 / 41.30 Euros
Brief info on COLT S.A.A. .45 Revolvers
Colt SAA revolvers have been produced as Single Action Army and Buntline models . . . standard models have a round top frame . . . barrel lengths are 4 3/4, 5 1/2, and 7 1/2 inches. The Buntline model came with a 12 inch barrel but was otherwise similar to the regular SAA.
The SAA uses a hammer mounted firing pin, and a loading gate in the left side of the frame gives access for loading and unloading. The steel ejector rod housing is located on the lower right side of the barrel, aligned with the loading gate.
The fluted cylinder is easily removed for cleaning . . . and can be removed from the right side of the frame.
To eject fired cases from a Colt single action revolver, the hammer is put in its half-cock position . . . the cylinder is manually rotated . . . so that a stroke of the spring loaded ejector rod can knock out the case. Loading is likewise accomplished one chamber at a time