|
Welcome to MG-Props
|
|
|
|
Metal Y.T COLT S.A.A. .45 Artillery With Real Wood Grips
Brand new Metal Y.T : COLT S.A.A. .45 (Artillery) ALL Metal with Real Wood Grips Functions, strips like the real thing! Weight approx: 1.1 Kilogram Barrel Length approx: 5 1/2" Vents from end of the barrel Brand new: Includes original box, six reusable Y.T .45 firing cartridges (to fire requires PFC primer caps/see below) International shipping, please ask for shipping quote. UK Customer this item is VCRA exempt. PFC Primer caps: €11.00 / £9.50 per box (1 box = 100 PFC caps) These are what makes the bang and smoke Spare firing cartridges set of 6: 14.95 euro / 12.60 GBP Hudson: Colt S.A.A. .45 Dummy Bullets:
Six real look dummy bullets :
€28.25 / £22.95 per box Colt S.A.A. .45 Real Look Dummy bullets Real look Colt .45 bullets with correct marking, great for display with your S.A.A. .45 : Six cartridges €33.25 / £22.95
Brief info on: COLT S.A.A..45 Revolvers Colt SAA revolvers have been produced as Single Action Army and Buntline models . . . standard models have a round top frame . . . barrel lengths are 4 3/4, 5 1/2, and 7 1/2 inches. The Buntline model came with a 12 inch barrel but was otherwise similar to the regular SAA. The SAA uses a hammer mounted firing pin, and a loading gate in the left side of the frame gives access for loading and unloading. The steel ejector rod housing is located on the lower right side of the barrel, aligned with the loading gate. The fluted cylinder is easily removed for cleaning . . . and can be removed from the right side of the frame. To eject fired cases from a Colt single action revolver, the hammer is put in its half-cock position . . . the cylinder is manually rotated . . . so that a stroke of the spring loaded ejector rod can knock out the case. Loading is likewise accomplished one chamber at a time
|
|
